Cantek - Automatic Edgebander with PUR/EVA Glue Pot MX570PUR
The MX570P from Cantek is designed to be a compact, and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of coil edge tape thicknesses between 0.4mm & 3mm and wood strips to 6mm.
- Touch screen control for operator convenience
- Motorized thickness adjustment.
- Equipped with line control for precise timing adjustment of working units.
- Work-piece is fed by chain conveyor
- Edge coil support plate: Ø 800mm (31 ½”), for PVC/ABS
- Automatic coil edge feeding with a thickness capacity of 0.4–3 mm; automatic strip feed magazine for solid wood edges up to 6mm
- Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
- Teflon-coated hot-melt glue pot for PUR & EVA glues
- Spring loaded pressure unit with (2) pressure rollers
- Pre-milling function can remove up to 3mm and is designed to provide an ideal edge for applying edge tape by cleaning up poorly cut panels. (2) counter rotating diamond cutterheads for optimum cut results.
- High frequency 12000 RPM end trimming unit, with Ø100mm (4”) TC-Saw blades
- Tiltable high frequency 12000 RPM top & bottom trimmers with insert knife cutters for flush, radius, & bevel trimming
- High frequency corner rounding unit can process 0.4-3mm thick edgebanding by tracing the shape of the panel
- Radius scraper with 2mm radius
- 3000 RPM top & bottom buffing units
- Heavy duty pressure beam with extendable work-piece support
- Heated infeed fence for pre-heating the panel for optimum glue penetration
Feeding speed 36 FPM 11 M/min. Panel thickness 0.315” – 2.36” 8-60 mm Coil edge thickness 0.016” ~ 0.118” 0.4-3 mm Max. wood strip thickness 0.236” 6mm (max) Min. Panel width 4.72” 120 mm Min. Panel length (without corner rounding) 6” 150 mm Corner rounding min. panel length (height 8~30mm) 8.66” 220 mm (height 30~60mm) 10” 250 mm Working table height 37.8” 960 mm Extensible support width 22 ¼” 565 mm Dust outlets Extension connector 5” x 3 125 mm x 3 Dust collection CFM requirement 3200 CFM Compressed air requirement 80 gallons/min (90-100 PSI) 300 liters/min (7kg/cm2) Electrical requirement 230/3/60 28 AMPS
We Also Recommend
PCM-120 Pneumatic Hollow Chisel Mortiser
$ 178/mon. CLICK TO APPLY!
Table Saw TA16B 10hp
$ 125/mon. CLICK TO APPLY!
Table Saw TA12 - 5hp/3hp
$ 78/mon. CLICK TO APPLY!
Table Saw TA12 - 5hp/1hp
$ 79/mon. CLICK TO APPLY!
Table Saw TA10 5HP
$ 63/mon. CLICK TO APPLY!