CANTEK C12RSH Straight Line Ripsaw
by Cantek
Original price
$20,475.00
-
Original price
$20,475.00
Original price
$20,475.00
$20,475.00
-
$20,475.00
Current price
$20,475.00
Save time and speed up production in your glue-up and ripping operations.
The Cantek C12RSH Straight Line Ripsaw is a single-blade ripsaw geared towards the shop looking to increase efficiency in their ripping operations but can not justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C12RSH can produce a glue joint finish ready for panel glue-up right out of the saw.
- Cast iron saw assembly, column, and table with superior vibration damping properties for optimum cutting results while ensuring long bearing and machine life.
- Rigid machine body consists of a thick welded steel frame.
- FC35 cast iron chain track with double-V design ensures precision straight-line ripping with a long wear life.
- Precision Built Saw Arbor constructed of nickel-chrome steel, large diameter, accurately ground and dynamically balanced.
- Arbor runs in precision angular contact type ball bearings (eliminates any radial run-out & axial thrust) – V Belt driven from below.
- Mechanical operation Chain Oiler provides consistent lubrication to the chain track and automatically adjusts to your feed speed.
- When oil runs low, a warning light will come on, and when it gets too low, the machine track stops running to avoid damage to the track.
- Cast iron rip fence is mounted to a large diameter round guide rail with a quick-locking lever for effortless and accurate adjustment.
- 3 sets of anti-kickback fingers. 2 top and 1 set in the table for added operator safety.
- Soft start – Star Delta starter reduces the amp draw on startup.
- Optional laser light to project the cutting line to achieve maximum material yield.
Saw arbor diameter |
1″ |
Saw blade diameter |
10 – 12″ |
Saw arbor speed |
4500 rpm |
Feed Speeds – variable |
50 to 120 FPM |
Maximum workpiece thickness |
3.34″ (12″ blade) |
Minimum workpiece length |
8″ |
Glue line guarantee |
10’ (+/- 0.0098” or 0.25mm) |
Distance between saw and column |
18″ |
Arbor motor |
15 HP |
Feed motor |
1 HP |
Electrical |
46 amps (230V); 23 amps (460V) |
Table size |
39″ x 57″ |
Table height |
31-7/8″ |
Dust port size |
4″ |
Net weight |
2,090 lbs |
Machine dimensions |
68” x 46” x 62” |
Shipping weight |
2,530 Lbs |
Shipping dimensions |
65″ x 55″ x 60″ |