Skip to content
Festool - Plunge Cut Track Saw TS 75 EQ-F-Plus-FS

Festool - Plunge Cut Track Saw TS 75 EQ-F-Plus-FS

by Festool
$1,139.50 - $1,139.50
$1,139.50
$1,139.50 - $1,139.50
$1,139.50

Plunge Cut Track Saw TS 75 EQ-F-Plus-FS

  • Description

    When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.

    Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.

    The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.

    Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.


    Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.

    HW standard saw blade W36; splinterguard; sight window; hex key 5 mm; plug it-power cable (4 m); 75" Guide Rail FS 1900; Systainer SYS3 M 437  

    Product strengths

    • Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.
    • Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.
    • The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
    • When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.

    Specifications

    Idle engine speed
    1 350 - 4 400
    Cable length
    4 MTR
    Min. dust extraction connection dia.
    1.06 INH
    Saw blade diameter
    8-1/4” (210 mm)
    Drive type
    Mains
    Cutting depth at 45°
    2-1/8” (55 mm)
    Dust extraction connection dia.
    1-1/16"/1-7/16" (27/36 mm)
    Power consumption
    1 600
    Cutting depth
    0" - 3” (0 - 75 mm)
    Angular range
    0 - 47

    Includes

    • 75" Guide Rail FS 1900
    • HW standard saw blade W36
    • Systainer SYS3 M 437
    • hex key 5 mm
    • plug it-power cable (4 m)
    • sight window
    • splinterguard